1. Product Introduction

This product is formulated with modified acrylic elastic emulsion. It delivers superior crack‑resistance beyond ordinary elastic coatings together with outdoor anti‑fouling performance. Its optimized formula enables exterior walls to remain bright and long‑lasting even exposed to wind and rain.

1. Product Application

Suitable for new construction and renovation exterior decoration of high‑end residences, office buildings, hotels, schools and public buildings.

1. Product Features

On the basis of fundamental functions of exterior wall paint, this product features excellent water‑resistance and high elasticity of paint film. It can resist and bridge fine wall cracks, effectively covering existing and potential cracks on building exterior surfaces caused by various factors.

1. Basic Data

• Condition in Container: No lumps, homogeneous after stirring
• Application Property: No obstacles for two brush coats
• Film Appearance: Normal
• Drying Time (Surface Dry): ≤ 2 hours
• Contrast Ratio (White / Light‑coloured): ≥ 0.94 (Premium Grade)
• Scrub Resistance: ≥ 2000 cycles (Premium Grade Standard)
• Accelerated Weathering Resistance: ≥ 600 hours (Chalking ≤ Grade 1, Discoloration ≤ Grade 2)
• Tensile Strength (Standard Condition): ≥ 2.0 MPa

1. Application Instructions

Substrate Preparation: The substrate must be sound, flat, clean and dry (moisture content ＜10 %, pH value ＜10). New walls shall be cured for more than 28 days. Remove loose dust and detached residues.

Recommended Coating System: ‑ Primer: One coat of pure‑acrylic alkali‑resistant sealing primer. ‑ Topcoat: Two coats of pure‑acrylic emulsion exterior paint.

Application Methods: Roller coating, brushing or spraying.

Dilution Recommendation: Dilute with clean water. Water addition shall not exceed 10‑15 % by paint weight (adjust according to application viscosity). Stir thoroughly before use.

Application Conditions: Ambient temperature ≥5℃; relative air humidity ＜85 %. Do not apply in rainy, snowy or windy weather.

1. Precautions

• Maintain adequate ventilation during application and curing period.
• Avoid application under low‑temperature (<5 ℃) or high‑humidity (>85 %) conditions.
• Keep product and tools out of reach of children; avoid contact with eyes and skin.
• Do not pour diluted paint back into the original container.

1. Packaging & Storage

Packaging Specification: 20 kg Shelf‑life: 12 months when hermetically stored in cool, dry and ventilated environment at 5‑35 ℃. Storage Requirement: Protect from frost and direct sunlight.

Disclaimer

Information contained in this technical sheet is based on the best and most accurate data available to us at present. Since usage conditions are beyond our control, this information shall not constitute a warranty. Our liability is limited to product selection itself. Product specifications may be updated continuously as products and manufacturing processes are improved. All information shall be subject to our latest confirmation. Please verify you are using the latest revision prior to use.