Acrylic topcoat
1 PRODUCT DESCRIPTION
A durable finish based on modified acrylic resin
2 RECOMMENDED USE
As a finish for steel structure, container, trailer.
3 FEATURES
One component product, no pot life limitation.
Good weather resistance.
Good construction performance
Excellent wear and impact resistance.
4 COMPLIED STANDARDS
Complies with the standard GB/T25264-2010 “Solvent-based Acrylic Resin Coatings”
5 PHYSICAL PROPERTIES
Color
Gloss
Mixing Ratio
Specific gravity
Volume Solids，%
Weight Solids，%
Film thickness
Theoretical Coverage
Various colors
30-40
Monocomponent
1.21±0.1
53±2%
70±2%
Dry ：30-50 microns/coat Wet：57-94microns/coat
0.114kg/m2 /50 microns
Practical：Variable on surface conditions, environment, applications method, etc.
6 APPLICATION
Application Temperature
Application Condition
Pot life
Application Methods
Thinner
Drying time & Overcoating interval
Applied substrate
Coating system
5℃-40℃
The relative humidity of the air should not greater than 85%.
The substrate temperature is 3℃ higher than the dew point.
Single-component does not involve
Airless spray, Air spray , Brush and roller
Airless spray 无气喷涂
Nozzle tip size 喷嘴尺寸
0.33mm-0.53mm
Nozzle pressure出口压力
10-15MPa
Thinning ratio稀释比率
5-15% by volume（体积比）
Air spray空气喷涂
Nozzle tip size 喷嘴尺寸
2mm-3mm
Nozzle pressure出口压力
0.3-0.6MPa
Thinning ratio稀释比率
20-30% by volume（体积比）
刷涂、滚涂Brush/Roller
Dilution ratio稀释比率
Acrylic acid diluent
Temperature
Dry to touch 指触干
60mins
30mins
20mins
6hrs
3hrs
2hrs
20mins
Min interval 最小涂装间隔
20mins
15mins
15mins
Max interval最大涂装间隔
Bare steel or suitable primed surface.
Epoxy primer or according to the coating system PUNTIUM
7 SURFACE PREPARATION
Remove salt and other water-soluble contaminants by fresh water.
Remove oil and grease with suitable detergent or solvent(SSPC-SP 1).
Remove rust, mill-scale and other foreign materials completely by abrasive blasting to achieve ISO Sa2 1/2(SSPC-SP 10) or better.
All coated surface must be clean, dry and free from any dust.
8 STORAGE
Storage
Shelf life
Store in dry, cool conditions, and away from sources of heat & ignition. Containers must be kept tightly closed.
12个月/25℃
12months/25℃
Shelf life：Subject to re-inspection thereafter.
9 CAUTIONS
SAFETY PRECAUTIONS
The following measures shall be ensured in all paint applications.
Avoid skin and eye contact.
If paint comes into contact with skin, wash with warm water and/or suitable cleanser. If paint comes into contact with the eyes, flush with copious amount of water and seek immediate medical attention.
Ensure good ventilation. Avoid inhalation of spray mist or vapour.
Application and handling of this product should be in compliance with relevant national regulations. Detail information is given on SDS.
10 DISCLAIMER
The information provided in this manual constitutes the most comprehensive and accurate data currently available to us. As the operating conditions of the product are beyond our control, this information does not constitute any warranty and is solely intended to assist the buyer in product selection. Given that our products and manufacturing processes are continuously evolving, this manual will be updated accordingly. All information herein shall be subject to our confirmation. Before using the product, please ensure that you have the latest version of this manual.
PREPARATION DATE
REVISION DATE
2025-04-28
2026-02-04.
