Waterborne alkyd primer
1 PRODUCT DESCRIPTION
This product is refined with water-based modified resin as the film-forming substance, supplemented with pigments, fillers, additives, deionized water and other components, offering excellent gloss and initial water resistance.
2 RECOMMENDED USE
Applicable to light and moderate anti-corrosion coating of metal substrates such as trailers, modified vehicles, carbon steel, stainless steel and galvanized sheets.
3 FEATURES
- Excellent decorative effect with long-lasting, vibrant colors.
- Good adhesion and wide applicability.
- Uses water as the solvent; non-flammable, non-explosive, quick drying and easy to apply.
- Excellent initial water resistance and corrosion resistance.
4 COMPLIED STANDARDS
Complies with HG/T 4847-2015 “Waterborne Alkyd Resin Coatings”.
5 PHYSICAL PROPERTIES
| Color | Colors |
| Gloss, GU@60° | 70 |
| Mixing Ratio | Monocomponent |
| Specific Gravity | 1.15±0.1 |
| Volume Solids | 40±2% |
| Weight Solids | 45±2% |
| Film Thickness | Dry: 35–45 microns/coat; Wet: 87–112 microns/coat |
| Theoretical Coverage | 0.115 kg/m² at 40 microns |
Practical coverage is variable depending on surface conditions, environment and application method.
6 APPLICATION
| Application Temperature | 0–40℃ |
| Application Condition | Relative humidity shall not exceed 85%. Substrate temperature shall be at least 3℃ above the dew point. |
| Pot Life | Not applicable to this single-component product |
| Application Methods | Airless spray, air spray, brush and roller |
| Thinner | Water |
| Applied Substrate | Bare steel |
| Coating System | According to the PUNTIUM recommended coating system |
Airless Spray
| Nozzle Tip Size | 0.43–0.53 mm |
| Nozzle Pressure | 10–15 MPa |
| Thinning Ratio | No dilution |
Air Spray
| Nozzle Tip Size | 1.3–1.8 mm |
| Nozzle Pressure | 0.4–0.6 MPa |
| Thinning Ratio | 0–15% by volume |
Brush / Roller
| Dilution Ratio | Adjust according to the construction effect. |
Drying Time at 23±2℃ and 50±5% RH (DFT 40 μm)
| Dry to Touch | ≤1 h |
| Dry to Handle | ≥24 h |
| Full Cure | ≥72 h |
7 SURFACE PREPARATION
- Remove salt and other water-soluble contaminants with fresh water.
- Remove oil and grease with suitable detergent or solvent in accordance with SSPC-SP 1.
- Remove rust, mill scale and other foreign materials completely by abrasive blasting to achieve ISO Sa 2½ (SSPC-SP 10) or better.
- All coated surfaces must be clean, dry and free from dust.
8 STORAGE
| Storage | Store in dry, cool conditions away from sources of heat and ignition. Containers must be kept tightly closed. |
| Shelf Life | 12 months at 25℃. Subject to re-inspection thereafter. |
9 CAUTIONS
SAFETY PRECAUTIONS
The following measures shall be ensured in all paint applications:
- Avoid skin and eye contact.
- If paint comes into contact with skin, wash with warm water and/or a suitable cleanser. If paint comes into contact with the eyes, flush with copious amounts of water and seek immediate medical attention.
- Ensure good ventilation. Avoid inhalation of spray mist or vapour.
- Application and handling of this product should comply with relevant national regulations. Detailed information is given in the SDS.
DISCLAIMER
The information provided in this manual constitutes the most comprehensive and accurate data currently available to us. As the operating conditions of the product are beyond our control, this information does not constitute any warranty and is solely intended to assist the buyer in product selection. Given that our products and manufacturing processes are continuously evolving, this manual will be updated accordingly. All information herein shall be subject to our confirmation. Before using the product, please ensure that you have the latest version of this manual.
PREPARATION DATE
May 16, 2023
REVISION DATE
February 4, 2026
