Химическая промышленность
- Главная
- Химическая промышленность
High-gloss, durable polyurethane finish for heavy-duty steel surfaces in new construction and industrial maintenance, including bridges and port machinery.
- Outstanding weathering and gloss retention.
- Good adhesion to epoxy primers.
- Excellent impact and abrasion resistance.
- Excellent resistance to extensive range of solvents and chemicals .
- High-build applicability
- Excellent anti-heat at temperatures up to 200℃.
- Outstanding weathering resistance and gloss retention.
- Good resistance to crude oil and seawater.
- Outstanding resistance to impact and abrasion.
- Good sealing ability and adhesion to moist surfaces..
- Low VOC, High volume solids.
- High-build applicability.
- Excellent durability against sea water.
A polyamide-cured epoxy anti-rust primer with excellent resistance to alkali, oil, water and rust. Its dry film withstands long-term temperatures up to 100°C.
- Excellent adhesion to light metals.
- Excellent surface tolerance.
- Tough, strong film.
- Good corrosion resistance and high build application.
- Use with many kinds of coating.
- Excellent resistance to abrasions and impacts.
- Excellent flexibility.
- Good construction performance.
- Resistance to cathodic protection.
- Long time for overcoating interval.
- Resistance to cathodic protection.
- Excellent high-build applicability
- Tough and strong films
- Obtainable thicker coating.
- Tough and hard, and very good abrasion resistance.
- Quick drying.
- Excellent light and color retention.
- Good resistance to crude oil and seawater.
- The absence of isocyanate compounds significantly enhances the LEED environmental quality certification.
Two-component, high-solids amine-adduct-cured epoxy coating with conductive materials for crude-oil and product-oil steel tank interiors.
- Long-term stable electrostatic conductivity.
- Excellent corrosion and permeation resistance.
- Good abrasion and impact resistance without contaminating oil.
Self-curing inorganic zinc coating based on an alkyl silicate binder. Protects blasted steel structures and piping before application of subsequent coating systems.
- Suitable for offshore and highly corrosive environments.
- Good corrosion resistance and high-build application.
- Resistant to impact, abrasion, solvents and heat.
Two-component inorganic zinc silicate shop primer for temporary corrosion protection during steel processing, storage and transportation.
- Good high-speed welding with low zinc fume.
- Good gas-cutting properties.
- Compatible with subsequent coating systems and resistant to heat treatment.
Two-component solvent-free epoxy primer-finish for freshwater tanks, storage tanks and water pipelines in atmospheric and immersed environments.
- Suitable for prepared carbon steel, stainless steel and concrete.
- Good solvent resistance.
- Excellent high-build, abrasion and impact resistance.
Durable single-component modified acrylic resin finish for steel structures, containers and trailers.
- No pot-life limitation.
- Good weather resistance.
- Good application performance with excellent wear and impact resistance.
Single-component alkyd topcoat for decorative protection of steel equipment, structures, pipelines and other steel surfaces.
- No pot-life limitation.
- Good weather and application performance.
- Excellent abrasion and impact resistance.
Low-VOC, high-solids, two-component surface-tolerant epoxy coating for hand-prepared rusty steel and other low-preparation surfaces in maintenance environments.
- Good corrosion resistance and adhesion to damp surfaces.
- Excellent surface tolerance.
- Tough, strong film.
Two-component, polyamide-cured penetrating epoxy sealer for steel structures and porous primers such as inorganic zinc coatings in moderate to severe corrosion.
- Suitable as a primer or intermediate sealing coat.
- Good penetration, adhesion and application.
- Free of lead, mercury, chromium and cadmium.
Polyurethane resin and inert-pigment topcoat for protecting and decorating metal surfaces exposed to heat, including industrial furnace exteriors and high-temperature pipelines.
- Excellent heat resistance.
- Excellent adhesion.
- Good application and decorative performance.
- Excellent heat resistance.
- Excellent adhension..
- Good applicability.
- Good workability and quick drying, good adhesion to various substrates
- Can be overcoated with both chlorinated rubber and oleo resinous topcoats and various antifouling paints.
A high-gloss, durable polyurethane finish for heavy-duty steel surfaces in new construction and industrial maintenance, including bridges and port machinery.
- Outstanding weathering resistance and gloss retention.
- Good adhesion to epoxy primers.
- Excellent impact and abrasion resistance.
