1. Product Introduction

This product is refined by advanced technology with high‑quality modified acrylic emulsion as the main film‑forming substance, together with titanium dioxide, calcium carbonate and other premium pigments, fillers and various functional additives. It features excellent hiding power, scrub resistance and workability, suitable for decoration and protection of interior walls and ceilings.

1. Product Application

For decoration and protection of interior walls and ceilings.

1. Product Features

◆ Eco‑friendly & Healthy: Odour‑reduced formula with low content of harmful substances such as VOC and formaldehyde, complying with national environmental standards. ◆ High Hiding Power: Effectively covers underlying wall colour with high spreading rate. ◆ Excellent Scrub Resistance: Tough paint film for easy cleaning and maintenance, withstands repeated daily scrubbing. ◆ Good Workability: Favourable levelling property, applicable by brushing, rolling, spraying and other methods. ◆ Strong Adhesion: Firm bonding to substrate, resistant to peeling‑off.

1. Basic Data

1. Condition in Container: No lumps, homogeneous after stirring
2. Application Property: No obstacles for two brush coats
3. Film Appearance: Normal
4. Drying Time (Surface Dry): ≤ 2 hours
5. Contrast Ratio (White / Light‑coloured): ≥ 0.93 (Premium Grade)

1. Application Instructions

5.1 Substrate Preparation

‑ The base surface must be sound, dry, flat, clean, free of loose dust and grease stains. ‑ Wall moisture content shall be less than 10 %, pH value shall be lower than 10. ‑ Uneven areas shall be levelled with putty, sanded smooth and fully cured. New plastered walls are recommended to cure for 4‑8 weeks prior to painting.

5.2 Application Conditions

‑ Ambient temperature: 5℃‑35℃ is recommended. ‑ Ambient humidity: Relative humidity below 85 %.

5.3 Dilution

‑ Stir thoroughly before use. ‑ Dilute with 0‑20 % clean water according to application method. Note: Do not over‑dilute, otherwise film performance will be impaired.

5.4 Coating System

‑ It is recommended to apply one coat of water‑borne interior alkali‑resistant primer, followed by two coats of this topcoat.

5.5 Application Methods

Brushing, rolling, spraying are acceptable.

5.6 Drying & Recoating Interval (at 25 ℃, 50 % RH)

‑ Dry‑to‑touch: approx. 0.5‑1 hour. ‑ Recoating interval: minimum 2‑4 hours.

5.7 Tool Cleaning

‑ Clean tools promptly with clean water right after application.

1. Precautions

• Keep good indoor ventilation during painting and curing period.
• Avoid application under low temperature (<5 ℃) or high humidity (>85 %).
• Keep product and tools out of reach of children; avoid contact with eyes and skin.
• Do not pour diluted paint back into the original container.

1. Packaging & Storage

Packaging Specification: 20 kg Shelf‑life: 12 months when hermetically stored in cool, dry and ventilated place at 5‑35 ℃. Storage Requirement: Protect from frost and direct sunlight.

Disclaimer

Information contained in this technical sheet is based on the best and most accurate data available to us at present. Since usage conditions are beyond our control, this information shall not constitute a warranty. Our liability is limited to product selection itself. Product specifications may be updated continuously as products and manufacturing processes are improved. All information shall be subject to our latest confirmation. Please verify you are using the latest revision prior to use.