Cold spray zinc finish
1 PRODUCT DESCRIPTION
The paint is composed of acrylic resin, pigments, solvent, anti-settling agent, accelerator, aluminium powder and other additives.
2 RECOMMENDED USE
It has good gloss and physical-mechanical properties, fast drying, good hardness and good application performance. The film is tough, full and glossy. The self-drying paint can dry at room temperature or under low-temperature baking. It is widely applicable to machinery, vehicles, handicrafts and other steel facilities.
3 FEATURES
- Fast film drying.
- مقاومة جيدة للطقس.
- أداء جيد للتطبيق.
- Excellent silver appearance.
4 COMPLIED STANDARDS
Complies with Q/370883SBQ016-2022, Silver Powder Paint.
5 PHYSICAL PROPERTIES
| لون | Gray |
| Gloss | لا شرط |
| نسبة الخلط | Single component |
| Specific Gravity | 1.06 ± 0.10 g/cm³ |
| Volume Solids | 47 ± 2% |
| Weight Solids | 52 ± 2% |
| Film Thickness | Dry: 30–50 microns/coat; Wet: 64–106 microns/coat |
| التغطية النظرية | 0.090 kg/m² at 40 microns |
Practical coverage varies with surface condition, environment and application method.
6 APPLICATION
درجة حرارة التطبيق: 5–40°C
Application Conditions: Relative humidity below 85%. Substrate temperature at least 3°C above the dew point.
Pot Life
| درجة حرارة | 5°C | 10°C | 20°C | 30°C |
| Pot Life | 24 h | 16 h | 8 h | 6 h |
طرق التطبيق: Airless spray, air spray, brush and roller.
| Method | Nozzle | Pressure | Thinning Ratio |
| Airless Spray | 0.33–0.43 mm | ≥15 MPa | 0–10% by volume |
| Air Spray | 2–3 mm | 0.3–0.6 MPa | 20–30% by volume |
| فرشاة/لفة | — | — | 5–10% by volume |
أرق: Cold spray zinc thinner.
Drying Time and Overcoating Interval
| درجة حرارة | 5°C | 20°C | 30°C |
| Dry to Touch | 3 h | 1.5 h | 1 h |
| Dry Hard | 6 h | 3 h | 2 h |
| Minimum Interval | 48 h | 36 h | 24 h |
| Maximum Interval | — | — | — |
Applied Substrate: الصلب العاري.
Coating System: According to the PUNTIUM recommended coating system.
7 SURFACE PREPARATION
- Remove salts and water-soluble contaminants with fresh water.
- Remove oil and grease with suitable detergent or solvent in accordance with SSPC-SP 1.
- Abrasive blast to ISO Sa 2½ / SSPC-SP 10 or better.
- All surfaces must be clean, dry and dust-free.
8 STORAGE
Store in dry, cool conditions away from heat and ignition. Keep containers tightly closed.
Shelf Life: 12 months at 25°C, subject to re-inspection thereafter.
9 تحذيرات
احتياطات السلامة
- تجنب ملامسة الجلد والعين.
- Wash skin with warm water and/or suitable cleanser. Flush eyes with plenty of water and seek immediate medical attention.
- Ensure good ventilation and avoid inhaling spray mist or vapour.
- Comply with relevant national regulations and consult the SDS.
إخلاء المسؤولية
The information provided constitutes the most comprehensive and accurate data currently available. Operating conditions are beyond our control, so it does not constitute a warranty and is intended solely to assist product selection. Confirm that the latest TDS is used before application.
PREPARATION DATE: 2020-08-28
REVISION DATE: 2026-02-04
