Waterborne fluorocarbon paint
1 PRODUCT DESCRIPTION
A two-component coating formulated with waterborne fluorocarbon resin and high-grade pigments and fillers.
2 RECOMMENDED USE
Widely used on steel bridges, port machinery, storage tanks, vehicles and other structures requiring high decorative quality and strong protection.
3 FEATURES
- Environmental protection and safety.
- Excellent weather resistance and durability.
- Excellent physical and chemical properties.
- Decorative quality and convenient application.
- Good compatibility within coating systems.
4 COMPLIED STANDARDS
Complies with HG/T 4104-2019, Waterborne Fluororesin Coatings.
5 PHYSICAL PROPERTIES
| Color | Various colors |
| Gloss | 80 GU at 60° |
| Mixing Ratio | Base/Hardener = 20/2 by weight |
| Specific Gravity | 1.25 ± 0.10 g/cm³ |
| Volume Solids | 35 ± 2% |
| Weight Solids | 47 ± 2% |
| Film Thickness | Dry: 40–60 microns/coat; Wet: 114–171 microns/coat |
| Theoretical Coverage | 0.179 kg/m² at 50 microns |
Practical coverage varies with surface condition, environment and application method.
6 APPLICATION
Application Temperature: 5–40°C
Application Conditions: Relative humidity below 85%. Substrate temperature at least 3°C above the dew point.
Pot Life
| Temperature | 10°C | 20°C | 30°C | 40°C |
| Pot Life | 3 h | 3 h | 2 h | 1 h |
Application Methods: Airless spray, air spray, brush and roller.
| Method | Nozzle | Pressure | Thinning Ratio |
| Airless Spray | 0.43–0.53 mm | 12–20 MPa | 0–10% by volume |
| Air Spray | 2.0–2.5 mm | 0.3–0.5 MPa | 0–10% by volume |
| Brush/Roller | — | — | Adjust as required for application |
Thinner: Water.
Drying Time at 50 Microns DFT
| Condition | Dry to Touch | Dry to Handle |
| 25°C at 50% RH | 30 min | More than 4 h |
| 80°C | 10 min | 20 min |
Applied Substrate: Bare steel.
Coating System: According to the PUNTIUM recommended coating system.
7 SURFACE PREPARATION
- Remove salts and water-soluble contaminants with fresh water.
- Remove oil and grease with suitable detergent or solvent in accordance with SSPC-SP 1.
- Abrasive blast to ISO Sa 2½ / SSPC-SP 10 or better.
- All surfaces must be clean, dry and dust-free.
8 STORAGE
Store in dry, cool conditions away from heat and ignition. Keep containers tightly closed.
Shelf Life: 12 months at 25°C, subject to re-inspection thereafter.
9 CAUTIONS
SAFETY PRECAUTIONS
- Avoid skin and eye contact.
- Wash skin with warm water and/or suitable cleanser. Flush eyes with plenty of water and seek immediate medical attention.
- Ensure good ventilation and avoid inhaling spray mist or vapour.
- Comply with relevant national regulations and consult the SDS.
DISCLAIMER
The information provided constitutes the most comprehensive and accurate data currently available. Operating conditions are beyond our control, so it does not constitute a warranty and is intended solely to assist product selection. Confirm that the latest TDS is used before application.
PREPARATION DATE: 2024-06-21
REVISION DATE: 2026-02-04
