1 PRODUCT DESCRIPTION

A modified amide cured epoxy modified epoxy anti-corrosive coating for liquid tank of ship.

2 RECOMMENDED USE

As a sealer or intermediate coat for cement and concrete surface of tidal and splash zone.

3 FEATURES

Good sealing ability and adhesion to moist surfaces..

Low VOC, High volume solids.

High-build applicability.

Good adhesion to bare steel substrates and a wide range of shop-primed surfaces.

Excellent durability against sea water.

4 COMPLIED STANDARDS

Complies with the standard HG/T4566-2013 “Epoxy Resin Primer”

5 PHYSICAL PROPERTIES

Color

Gloss

Mixing Ratio

Specific gravity

Volume Solids，%

Weight Solids，%

Film thickness

Theoretical Coverage

Oxide red, Greys

No requirement

Base/Hardener=9/1(by weight)

1.42±0.1

80±2%

85±2%

Dry ：100-200 microns/coat Wet：125-250microns/coat

0.178 kg/m2/100microns

Practical：Variable on surface conditions, environment, applications method, etc.

6 APPLICATION

Application Temperature

Application Condition

Pot life

Application Methods

Thinner

Drying time & Overcoating interval

Applied substrate

Coating system

5℃-40℃

The relative humidity of the air should not greater than 85%.

The substrate temperature is 3℃ higher than the dew point.

Temperature (℃)

Pot life (hrs)

Airless spray, Air spray , Brush and roller

Airless spray 无气喷涂

Nozzle tip size 喷嘴尺寸

0.43mm ~ 0.53mm

Nozzle pressure出口压力

10~15 Mpa

Thinning ratio稀释比率

0-10% by volume（体积比）

Air spray空气喷涂

Nozzle tip size 喷嘴尺寸

1.5mm-2mm

Nozzle pressure出口压力

0.3-0.4MPa

Thinning ratio稀释比率

0-10% by volume（体积比）

刷涂、滚涂Brush/Roller

Dilution ratio稀释比率

Epomarine thinner

Temperature

Dry to touch 指触干

5hrs

4hrs

3hrs

2hrs

30hrs

24hrs

16hrs

8hrs

Min interval 最小涂装间隔

72hrs

48hrs

24hrs

16hrs

Max interval最大涂装间隔

7Days

7Days

7Days

7Days

Bare steel or suitable primed surface.

Acrylic, chlorinated rubber and PU topcoatt or according to the coating system PUNTIUM

7 SURFACE PREPARATION

Remove salt and other water-soluble contaminants by fresh water.

Remove oil and grease with suitable detergent or solvent(SSPC-SP 1).

Remove rust, mill-scale and other foreign materials completely by abrasive blasting to achieve ISO Sa2 1/2(SSPC-SP 10) or better.

All coated surface must be clean, dry and free from any dust.

8 STORAGE

Storage

Shelf life

Store in dry, cool conditions, and away from sources of heat & ignition. Containers must be kept tightly closed.

12个月/25℃

12months/25℃

Shelf life：Subject to re-inspection thereafter.

9 CAUTIONS

SAFETY PRECAUTIONS

The following measures shall be ensured in all paint applications.

Avoid skin and eye contact.

If paint comes into contact with skin, wash with warm water and/or suitable cleanser. If paint comes into contact with the eyes, flush with copious amount of water and seek immediate medical attention.

Ensure good ventilation. Avoid inhalation of spray mist or vapour.

Application and handling of this product should be in compliance with relevant national regulations. Detail information is given on SDS.

10 DISCLAIMER

The information provided in this manual constitutes the most comprehensive and accurate data currently available to us. As the operating conditions of the product are beyond our control, this information does not constitute any warranty and is solely intended to assist the buyer in product selection. Given that our products and manufacturing processes are continuously evolving, this manual will be updated accordingly. All information herein shall be subject to our confirmation. Before using the product, please ensure that you have the latest version of this manual.

PREPARATION DATE

REVISION DATE

2021-05-06

2026-02-04.