1 PRODUCT DESCRIPTION

This product is formulated with premium imported film-forming substances, combined with high-efficiency rust-preventing pigments such as zinc phosphate and aluminum tripolyphosphate, resulting in a cost-effective single-component water-based industrial paint.

2 RECOMMENDED USE

This product functions as a primer or a combined primer and topcoat, designed to protect metal surfaces (e.g., steel) in moderately corrosive environments from rust and for decorative purposes.

3 FEATURES

High solid content, easy to form a thick film, and large coating area.

It has excellent anti-rust performance, quick drying and excellent initial water resistance.

The film is tough, impact resistant and outstanding anti-rust performance.

4 COMPLIED STANDARDS

Complies with the standard HG/T 4758-2014 “Waterborne Acrylic Resin Coatings”

5 PHYSICAL PROPERTIES

Color

Gloss

Mixing Ratio

Specific gravity

Volume Solids，%

Weight Solids，%

Film thickness

Theoretical Coverage

Colors

Monocomponent

1.3±0.1

36±2%

52±2%

Dry：60-80 microns/coat Wet：167-222microns/coat

0.217 kg/m2 /60 microns

Practical：Variable on surface conditions, environment, applications method, etc.

6 APPLICATION

Application Temperature

Application Condition

Pot life

Application Methods

Thinner

Drying time & Overcoating interval

Applied substrate

Coating system

0℃-40℃

The relative humidity of the air should not greater than 85%.

The substrate temperature is 3℃ higher than the dew point.

Single-component does not involve

Airless spray, Air spray , Brush and roller

Airless spray 无气喷涂

Nozzle tip size 喷嘴尺寸

0.33~ 0.48mm

Nozzle pressure出口压力

8-12MPa

Thinning ratio稀释比率

Sagging流挂

400 μm

Air spray空气喷涂

Nozzle tip size 喷嘴尺寸

1.3mm-1.8mm

Nozzle pressure出口压力

0.3-0.5MPa

Thinning ratio稀释比率

0-10% by volume（体积比）

刷涂、滚涂Brush/Roller

Dilution ratio稀释比率

0-10% by volume（体积比）

Water

DFT：60μm

触干Dry to touch

硬干Dry to handle

25℃±2

40min

24h

Bare steel.

According to the coating system PUNTIUM

7 SURFACE PREPARATION

Remove salt and other water-soluble contaminants by fresh water.

Remove oil and grease with suitable detergent or solvent(SSPC-SP 1).

Remove rust, mill-scale and other foreign materials completely by abrasive blasting to achieve ISO Sa2 1/2(SSPC-SP 10) or better.

All coated surface must be clean, dry and free from any dust.

8 STORAGE

Storage

Shelf life

Store in dry, cool conditions, and away from sources of heat & ignition. Containers must be kept tightly closed.

12个月/25℃

12 months/25℃

Shelf life：Subject to re-inspection thereafter.

9 CAUTIONS

SAFETY PRECAUTIONS

The following measures shall be ensured in all paint applications.

Avoid skin and eye contact.

If paint comes into contact with skin, wash with warm water and/or suitable cleanser. If paint comes into contact with the eyes, flush with copious amount of water and seek immediate medical attention.

Ensure good ventilation. Avoid inhalation of spray mist or vapour.

Application and handling of this product should be in compliance with relevant national regulations. Detail information is given on SDS.

10 DISCLAIMER

The information provided in this manual constitutes the most comprehensive and accurate data currently available to us. As the operating conditions of the product are beyond our control, this information does not constitute any warranty and is solely intended to assist the buyer in product selection. Given that our products and manufacturing processes are continuously evolving, this manual will be updated accordingly. All information herein shall be subject to our confirmation. Before using the product, please ensure that you have the latest version of this manual.

PREPARATION DATE

REVISION DATE

2024-11-08

2026-02-04.