1 PRODUCT DESCRIPTION
This product is a coating formulated with synthetic resin emulsion as the base material, incorporating pigments, fillers, and various functional additives through specific processing techniques.
2 RECOMMENDED USE
This product series consists entirely of matte coatings, serving as decorative and protective materials for interior exterior wall surfaces.
3 FEATURES
- Environmentally friendly, low VOC.
- Good adhesion and wide applicability.
- Good covering power.
- Wash resistance.
- Soft hand feel and excellent alkali resistance.
- Excellent color retention and weather resistance.
4 PHYSICAL PROPERTIES
| Color | Various colors |
| Weight Solids | 55.0±2% |
| Volume Solids | 43.0±2% |
| Specific Gravity | 1.30±0.20 |
| VOC | ≤50 g/L |
| Flash Point | >60℃ |
| Film Thickness | Dry: 50–60 microns/coat; Wet: 116–140 microns/coat |
| Theoretical Coverage | 0.151 kg/m² at 50 microns |
Practical coverage is variable depending on surface conditions, environment and application method.
5 APPLICATION
| Application Temperature | 5–40℃ |
| Application Methods | Airless spray, air spray, brush and roller |
| Thinner | Water |
| Applied Substrate | Water-based alkyd primer or refer to our company’s painting specifications. |
Airless Spray
| Nozzle Tip Size | 1.5–1.9 mm |
| Nozzle Pressure | 10–15 MPa |
| Thinning Ratio | Can be directly sprayed |
| Anti-sagging | W.F.T. 150 μm |
Air Spray
| Dilution Ratio | 0–10% by volume |
Brush / Roller
| Dilution Ratio | Adjust according to the construction effect. |
Drying Time and Minimum Overcoating Interval (DFT 50 μm)
| Temperature | Dry to Touch | Dry to Handle | Minimum Overcoating Interval |
|---|
| 5℃ | 5 h | 24 h | 5 h |
| 20℃ | 1 h | 8 h | 3 h |
| 30℃ | 0.5 h | 2 h | 2 h |
6 SURFACE PREPARATION
- Remove salt and other water-soluble contaminants with fresh water.
- Remove oil and grease with suitable detergent or solvent in accordance with SSPC-SP 1.
- Remove rust, mill scale and other foreign materials completely by abrasive blasting to achieve ISO Sa 2½ (SSPC-SP 10) or better.
- All coated surfaces must be clean, dry and free from dust.
7 STORAGE
| Storage | Store in dry, cool conditions and away from sources of heat and ignition. Containers must be kept tightly closed. |
| Shelf Life | 18 months at 5–40℃. Subject to re-inspection thereafter. |
8 CAUTIONS
SAFETY PRECAUTIONS
A health and safety data sheet is available upon request. Minimum precautions to be taken in dealing with all coatings are:
- Avoid skin and eye contact.
- If coating comes into contact with skin, wash with warm water and/or a suitable cleanser. If coating comes into contact with the eyes, flush with copious amounts of water and seek immediate medical attention.
- Ensure good ventilation. Avoid inhalation of spray mist or vapour.
- Application and handling of this product should comply with relevant national regulations. Detailed information is given in the MSDS.
DISCLAIMER
The information given on this sheet is to the best of our knowledge and accurate at the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development. Please check that this data sheet is current prior to using the product.
REVISION DATE
April 29, 2025
