Single-component water-based dip-coating paint
1 PRODUCT DESCRIPTION
A single-component water-based acrylic-modified epoxy ester coating.
2 RECOMMENDED USE
Designed for dip coating of tracks, automotive parts, tools, agricultural machinery and other metal components.
3 FEATURES
- Single-component and easy to apply.
- Good adhesion and corrosion protection.
- Water-based and environmentally responsible.
- Suitable for dip-coating production lines.
4 COMPLIED STANDARDS
Complies with HG/T 4758-2014.
5 PHYSICAL PROPERTIES
| Color | Various colors |
| Gloss | 15 GU at 60° |
| Mixing Ratio | Single component |
| Specific Gravity | 1.40 ± 0.10 g/cm³ |
| Volume Solids | 31.5 ± 2% |
| Weight Solids | 40 ± 2% |
| Film Thickness | Dry: 40–60 microns/coat; Wet: 95–159 microns/coat |
| Theoretical Coverage | 0.222 kg/m² at 50 microns |
Practical coverage varies with surface condition, environment and application method.
6 APPLICATION
Application Temperature: 5–40°C
Application Conditions: Relative humidity below 85%. Substrate temperature at least 3°C above the dew point.
Pot Life: Not applicable to a single-component product.
Application Method: Dip coating.
| Construction Viscosity at 23°C, DIN 4 | 40–60 seconds |
| Flash and Baking | Flash dry at room temperature for 15 minutes, then bake at 60°C for 40 minutes, or air dry at 20°C for 24 hours. |
| Thinning Ratio | 0–5% by volume |
Thinner: Water.
Applied Substrate: Metallic material and surface-treated metal substrate.
Coating System: According to the PUNTIUM recommended coating system.
7 SURFACE PREPARATION
- Remove salts and water-soluble contaminants with fresh water.
- Remove oil and grease with suitable detergent or solvent in accordance with SSPC-SP 1.
- Remove rust, mill scale and foreign material by abrasive blasting to ISO Sa 2½ / SSPC-SP 10 or better.
- All coated surfaces must be clean, dry and dust-free.
8 STORAGE
Store in dry, cool conditions away from heat and ignition. Keep containers tightly closed.
Shelf Life: 6 months at 25°C, subject to re-inspection thereafter.
9 CAUTIONS
SAFETY PRECAUTIONS
- Avoid skin and eye contact.
- If paint contacts skin, wash with warm water and/or suitable cleanser. If it contacts the eyes, flush with plenty of water and seek immediate medical attention.
- Ensure good ventilation and avoid inhaling spray mist or vapour.
- Application and handling must comply with relevant national regulations. Refer to the SDS.
DISCLAIMER
The information provided constitutes the most comprehensive and accurate data currently available. Operating conditions are beyond our control, so it does not constitute a warranty and is intended solely to assist product selection. Products and manufacturing processes continue to evolve. Confirm that the latest TDS is used before application.
PREPARATION DATE: 2023-12-17
REVISION DATE: 2026-02-04
